Oak herringbone boards featuring an ashen and flaxen blend, brushed to reveal rustic character, and finished with a matt lacquer for a contemporary look.
Installation
Nailing down
Goodrich can be secret nailed to an existing timber subfloor including solid wood flooring, plywood, OSB and particleboard.
The subfloor needs to be of a suitable width and thickness in order to
hold 50mm cleats fired into it at a 45° angle. Joists should be kiln dried to avoid cupping or expansion and must be spaced in accordance with building regulations. The space between joists is predetermined but we recommend a maximum of 400mm intervals otherwise.
Gluing down
Goodrich can be glued directly to concrete, ceramic tiles, terrazzo, metal, slate, marble, OSB or plywood. Ensure the existing surface is ‘rough’ or porous. Pre-sand any slick or sealed surfaces – gypsum and anhydrite screeds especially need to be abraded to remove the soft surface laitance.
When gluing to concrete, we recommend using Woodpecker 11P Surface Primer to ensure a strong bond between the subfloor and adhesive. For gypsum, or anhydrite screeds, additional preparation will be required, involving removal of the soft surface laitance and refinishing with Woodpecker Level-X Primer and Level-X levelling compound.
Floating
A floating floor can be installed over concrete, anhydrite, existing wood floor chipboard, ceramic tiles, terrazzo, metal, PVC, linoleum, slate, marble, particleboard, OSB and plywood – but not carpet.
The type of underlay you need will depend on the subfloor condition. However, for most installations we recommend using an underlay with a built- in damp proof membrane, such as Floormate or Aquastop.
FAQ's
What styles can I lay this herringbone floor in?
You can lay this Goodrich floor as single herringbone, double herringbone, ladder pattern, 90-degree angle, or brickbone pattern. It can also be laid as a border around a section of Goodrich herringbone.
Does my Goodrich floor need to acclimatise before installing?
Yes – We recommend you let your Goodrich floor acclimatise for 3 to 4 days before installing. This needs to be in the same room that it will be installed in, and it needs to remain within the sealed packaging. The sealed packaging helps ensure the floor doesn’t warp with the change of temperature from different environments. Do not store the flooring outdoors, in an outbuilding, or anywhere with damp or condensation problems.
What condition should the subfloor be in?
The surface immediately beneath a Woodpecker natural wood floor must be in good structural condition, free from damp rot, fungal or insect infestation, and contaminating residues. It must be flat with uneven areas not exceeding 3mm over a 2m area. Naturally, the surface should be vacuumed and totally free of debris before fitting begins. Hot pipes should be well insulated to prevent localised hotspots, which can cause wood flooring to warp or shrink.
What expansion gaps does Goodrich flooring need?
As wood is a natural substance, it will expand and contract with changes in temperature and humidity. That’s why when a wood floor is fitted, expansion gaps need to be left wherever the boards meet a wall, structural support, stairs, breakfast bar, fireplace, central heating pipe…etc. Gaps must also be considered at doorways to allow for the differing expansion between rooms. Place spacers at regular intervals when fitting and then remove them before skirting boards, beading or trims are put in place. Allow a 2mm gap for every metre span of the floor with a minimum of 10-15mm gap regardless. For areas over 5m in width, extra provisions should be made for expansion.
How thick is Goodrich flooring?
Goodrich flooring is 15mm thick with a 4mm real oak wear layer.
How do I clean my Goodrich floor?
All of our Goodrich floors have a lacquered finish, therefore you can use our cleaning kit for lacquered floors. You may also keep it clean with a well wrung damp mop.
Is Goodrich flooring harder to install than plank flooring?
Patterned flooring such as herringbone or chevron is generally much more complex to install than traditional straight plank. This is because the pattern needs to be measured and laid perfectly, otherwise you will end up with gaps. Therefore we recommend choosing an installer who has plenty of experience.
Does this rustic board have lots of knots?
Whilst this board is rustic, it will generally have fewer knots than a rustic traditional straight plank board as herringbone boards are much smaller, therefore large knots can weaken them.
Can I use underfloor heating with Goodrich flooring?
Yes – Goodrich is suitable when fully stuck down.
How can Goodrich floors be installed?
Goodrich can be floated, glued or secret nailed.
What joints does Goodrich flooring have?
Goodrich floors have tongue & groove joints.
Can I use Goodrich flooring in my bathroom?
We generally wouldn’t recommend using engineered flooring in a bathroom.
How much should I allow for wastage?
We would recommend 10-15% wastage for Goodrich floors, however, this can be impacted by the room shape, laying style and other factors so always check with your installer first.
Delivery
Flooring Deliveries
All Woodpecker deliveries are made either from Woodpecker's main warehouse or our store in Coleford, Gloucestershire. We only keep stock of our most popular lines. Please allow up to 5 working days for standard delivery.
All flooring deliveries are curb-side. You will need to carry the goods into your property. If this is likely to be a problem please inform us at the time of your order to discuss alternative delivery options.
We are currently unable to offer an estimated delivery time for curb-side deliveries. If you require a time on the day of delivery, please contact our team and we hopefully can obtain one for you.
If no one is available to accept your delivery at the address you’ve provided, we will charge you for re-delivery when you reschedule.
PLEASE NOTE
Deliveries can be made in a variety of commercial vehicles, up to 18-tonne lorries. It is assumed that the property is easily accessible to these vehicle types.
Flooring cannot be delivered to properties which have stepped access, flats above the ground floor (regardless of lift access) or left in communal areas. For flats, your order will be left at the ground floor external doorstep, for residential properties with stepped access flooring will be left at the bottom of the steps. Drivers may need assistance with unloading larger items.
If access is likely to be a problem please inform us at the time of order to discuss alternative delivery options.
Light Accessories
Doorstep delivery is available for lighter parcels. Depending on courier, you will receive delivery time updates. Please leave your mobile number when checking out.
Returns
Changed your mind?
If you wish to cancel your order before it has been dispatched, contact us at info@newlandfloorsanddoors.co.uk stating your order number and which item/s you are cancelling.
Damaged or missing goods?
In the rare event that you receive damaged goods or there are missing items, we strongly suggest that you contact us directly as soon as possible so that we can resolve it swiftly.
Please follow the steps below should you receive faulty products:
- Please send us photos of the damaged products with details of the order to info@newlandfloorsanddoors.co.uk, please do this within 48 of receiving the goods.
- Once your return request has been made, you will be sent a confirmation of the return and further information from us to complete.
- In order for a collection to be made, the sales return request must be completed (with photographs attached).
Left over packs?
We offer a full refund for unused and unopened packs of flooring within 30 days of delivery. If it has passed 30 days, unfortunately we cannot refund you.
- All goods must be stored correctly [ambient temperature, away from moisture] and will be moisture read on return to Woodpecker. If moisture reading is outside levels 7-11% WME, then a refund will not be issued.
- All goods must be in their original packaging with only clear tape used to reseal packs.
- A £25 collection charge will be applied to all returns.
- On receipt at Woodpecker, returns will be inspected and any damaged goods will be deducted from the return value.
- Please note, a 20% restocking fee applies to all returns.
Unfortunately, the restocking fee is out of our control and is part of our suppliers policy. We will always let you know about this prior to your return and will confirm deductions before a collection is arranged.
Available Now
Call our friendly team for a volume discount!
Spread the cost at checkout!
