Floorify Adaptor Ramp Profile 2000mm

The Floorify Adaptor Ramp Profile (also called an adapter profile) joins two floors with a small difference in height, bridging 5.5 to 6.5mm between two rooms. It slopes gently so there is no abrupt edge to catch a foot, in the same colour and finish as your Floorify floor.

This is a matching accessory, made in the same colour and finish as your Floorify floor. If a Floorify floor is already in your basket, we will match it to your chosen floor automatically. If you are ordering it on its own, just leave a note at checkout with the Floorify colour and finish you need.

Where to use it

Use it in a doorway where one floor sits 5.5 to 6.5mm higher than the other. If both floors are the same height the T-Profile is the right profile, and for a floor that stops at a threshold use the End Profile.

Fitting

Cut the profile and the plastic rail to length. Fix the rail to the subfloor between the two floors with suitable glue or screws, leaving the recommended 5mm expansion gap between the rail and the floor. Then click the profile onto the rail.

These plastic profiles are for residential use. Floorify's commercial warranty calls for metal profiles.

Key Features

• Size: 2000mm long x 40.5mm wide x 10mm thick
• Bridges a height difference of 5.5 to 6.5mm
• Colour and finish matched to your Floorify floor
• Click-on profile with a plastic rail, fixed with glue or screws
• Needs a 5mm expansion gap

Complete the room with the Standard Skirting or High Skirting, and see the Performance Underlay and Comfort Underlay for what goes under the floor.